Concord, CA HVAC Repair & Installation | Fairview Air

Diagnosed cooling issues on a Rheem RA1636AJ1NA. Found a clogged filter restricting airflow and a loose low-voltage wire causing intermittent shutoff. Re-secured wiring and replaced filter. System restored to full functionality.

Routine maintenance uncovered a blower motor that was drawing too many amps. Recommended replacement before failure. Installed a new blower motor, tested airflow, and adjusted fan speed. System is now running efficiently with improved airflow.

A homeowner mentioned reduced airflow and uneven cooling. Inspected the system and found dust buildup on the evaporator coil restricting airflow. Performed a deep coil cleaning, checked static pressure, and adjusted dampers for better distribution. The home is now cooling evenly.

Arrived at a home where the AC was making loud noises and not cooling. The compressor had failed due to overheating and age. We replaced the compressor, tested refrigerant levels, and verified proper operation. The system is now running efficiently again.

Just finished commissioning a newly installed American Pride ductless heat pump system in Pittsburg. This involved a series of checks and adjustments to ensure optimal performance. I verified refrigerant charge using a manifold gauge set, measuring subcooling and superheat to confirm proper levels. I also tested airflow at each indoor unit, adjusting fan speeds as needed to achieve the manufacturer's specifications. Additionally, I checked the electrical connections and voltage, confirming proper operation and safety. Finally, I reviewed the thermostat settings with the homeowner, ensuring they understand how to operate the system efficiently. Proper commissioning of ductless heat pump systems in Pittsburg is essential for maximizing energy efficiency, comfort, and equipment longevity.

Completed a routine maintenance visit in Concord today, focusing on a gas furnace. I thoroughly cleaned the burner assembly, which is crucial for maintaining optimal performance. Over time, dust, dirt, and soot can accumulate on the burner, hindering the combustion process and reducing the furnace's efficiency. In Concord, a clean burner ensures that the gas burns completely and efficiently, providing maximum heat output while minimizing energy waste. I used a brush and vacuum to remove all debris from the burner and surrounding components. This cleaning is a key part of annual furnace maintenance and contributes to safe, reliable, and efficient heating throughout the colder months in Concord.

Conducted a heating system tune-up in Concord. Checked gas pressure, inspected the heat exchanger, and tested the thermostat. Annual heating maintenance in Concord ensures safe and reliable operation during the colder months.

I performed heat pump maintenance in Concord on a Trane unit. I cleaned the condenser coil, checked refrigerant levels, and inspected the reversing valve. After completing a system check, I verified that the unit was running efficiently for both heating and cooling functions.

I repaired a Rheem heat pump in Concord. The system wasn’t cycling correctly due to a broken reversing valve. After replacing the valve and checking the refrigerant charge, the heat pump was back to full operation, providing both cooling and heating as needed.

I am in Concord, CA this morning doing the regular preventative maintenance on furnace in closet , change and date filters , check all heating components for proper operation , check gas valve , check pressure switch , check and clean flame sensor , check thermostat heating function , check combustion analysis , verify normal operation unit is about 30 years old as well.

Repaired a heat pump in Concord, CA. The system wasn’t providing heat due to a malfunctioning defrost control board. I replaced the control board and checked the reversing valve for proper function. After repairs, I tested the heat pump and restored the system’s normal operation.

Today, I installed a ductless heating system in Concord, CA. The system was a Mitsubishi Electric Hyper-Heating H2i ductless mini-split. I mounted the indoor unit in the living room and connected it to the outdoor compressor. After running the refrigerant lines and electrical connections, I tested the system to ensure it was working efficiently.

I repaired an AC system that wasn’t cooling due to a clogged condensate drain line. After clearing the blockage, I inspected the evaporator coil and cleaned it to improve airflow. I also checked the refrigerant levels and adjusted them to the proper specifications. The air conditioning system is now cooling effectively.

Resolved an issue with an AC unit that would not turn on. Conducted a thorough diagnostic, starting with testing the thermostat for proper settings and functionality. Checked for tripped circuit breakers and verified voltage at the contactor. Found and replaced a faulty contactor. Inspected and tightened all electrical connections. Tested the system to confirm reliable operation. Regular AC maintenance can prevent unexpected breakdowns and ensure efficient performance.

Today, I performed a comprehensive seasonal maintenance check on a residential central air conditioning system. I cleaned the condenser coils using a RIDGID coil cleaner, inspected refrigerant levels with a manifold gauge set, and ensured proper airflow across the evaporator coil. The system is now prepared for peak summer operation.

Today, I completed an AC tune-up and repaired a ducting issue on a Goodman GSX16 unit. I replaced the compromised flexible duct sections with R6 insulated ductwork, sealed joints with mastic, and verified airflow efficiency post-repair.

Yearly maintenance should be conducted on HVAC air conditioners. This includes checking refrigerant levels and inspecting components like coils and filters. Changing filters and cleaning coils ensures effective operation. Additionally, testing the thermostat for accuracy and securing electrical connections are crucial. Regular maintenance leads to increased longevity, lower energy usage, and optimal performance of the AC unit.

Just completed installing a top-of-the-line American Pride heat pump in Oakley, CA, optimizing energy efficiency and comfort! Integrated the American Pride 16 SEER Heat Pump with variable-speed compressor for precise temperature control. Enhanced with durable construction and advanced refrigeration technology for reliable performance.

Conducted a comprehensive fall furnace check, focusing on safety checks, filter replacements, and optimizing settings for efficient and trouble-free heating.

Seasonal furnace check up, and filter change.

Came to the property for the seasonal heating system inspection and maintenance service. Checked the heat exchanger, air filters, and burners. Verified the thermostat settings and inspected the ductwork for obstructions. Lubricated moving parts and tested all safety controls.

Seasonal system check up on a Bryant system.

Seasonal ac check up.

AC Repair & Cooling Services visit on a Rheem unit. Showing signs of wear on fan motor, evaporator coils, and compressor.

Went to a customer's home for heating repair on an American Standard unit. Found a problem with the heat exchanger. Was able to repair the faulty part same day. Customer was happy I was able to save them money by repairing rather than replacing, and the furnace is working well now.